Samplex IL50 - Versatile and effective in-line sampling
By using any of the CS range of samplers you can accurately check all incoming bulk loads on arrival. However, it is perhaps equally as important to your business that quality and consistency are carefully monitored throughout the compounding process. This means you can check as frequently as you wish for contamination, composition or quality deviation. Totally adaptable to your needs, the IL50 can be mounted almost anywhere to collect spot samples and send them to where they are needed very quickly.
Safety. Assurance. Consistency.
Samplex IL50
- Repeatable sampling is guaranteed.
- The same volume of sample is taken to enable accurate comparison of results.
- Reduction in labour input = reduction in human error.
- Minimisation of Health & Safety risks associated with manual sampling.
- Sample can be collected via a gravity feed flexible pipe.
- Designed for use as part of a continuous process line.
- Allows for constant quality monitoring within the product flow.
- Accepts samples from powders to 20mm pellets.
- Suitable for vertical ducts and angle ducts up to 45 degrees.
- Remote Control, operational up to 100m distance.
- Manufactured in accordance with ISO 9001.
- Compatible with the range of Holmen Pellet Durability Testers.
- The IL50 can be interfaced with existing milling process control equipment for total integration.
- Fully versatile, adaptable enough for a wide variety of products and flexible for most installations.
Dimensions and Function
The IL50 is powered by compressed air causing the sampler plug to enter the material flow and "catch" each sample.
Electricity Supply: 110-240 v AC
Air Supply: 3 - 6 Bar
Protrusion into duct: 170mm max
Control Circuit: 12 v DC
The IL50 is versatile enough to be suitable for installation into ducts angled as much as 45 degrees.
Sample Area: 60L x 60W x 60Dmm
Construction: Stainless steel with a durable powder coat.
The sampler plug then returns emptying the sample through the chute below.